Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterTrusted Chimney Cap & Crown for Kirkland Homeowners
Chimney cap and crown work in Kirkland typically runs $280-$1,850 depending on whether you’re installing a standard cap, rebuilding a cracked crown, or fitting a custom multi-flue system; see our Chimney Cap & Crown cost guide for full pricing details. Most jobs we book in Finn Hill, Juanita, and the Rose Hill areas are completed in a single visit with a written price agreed before any work starts. Call (425) 642-3485 and we’ll have a technician out to inspect, document what we find with a camera scan, and leave you with a written scope and price.
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a documented photo record under Clause 4 of the Haven Standard. In Kirkland’s wet winters, we regularly see crown deterioration accelerate where water pools on flat or improperly sloped concrete crowns, especially in homes built between 1985 and 2005 with original construction-grade caps. Our crews are background-checked, uniformed, and licensed, with your assigned tech’s name and license number provided when you book. Live phone support runs 24 hours a day, 7 days a week, and we text when your technician is on the way.
What Our Chimney Cap & Crown Service Includes
Cap Installation
Cap installation is the first line of defense against water, debris, and animal intrusion into your flue. In Kirkland Chimney Cap & Crown work, we install caps on chimneys that have never had one, particularly common in 1970s and 1980s construction in the Norkirk and Central Houghton neighborhoods where builders often omitted them. We measure your flue precisely, source materials through our Haven buying network from Famco or Copperfield, and secure the cap with stainless steel fasteners rated for Pacific Northwest wind loads.
Cap Replacement
Cap replacement becomes necessary when the existing cap is rusted through, blown off in a windstorm, or improperly sized from a previous installation. We remove the old cap, inspect the flue tile and crown surface beneath it for hidden damage, and install a replacement that matches your flue count and dimensions. In the Bridle Trails area, we’ve replaced dozens of caps that were held on with inadequate tension screws or wrong-gauge mesh, allowing squirrels and raccoons to pull them loose.
Crown Repair
Crown repair addresses cracks, spalling, or deterioration in the concrete slab that tops your masonry chimney and sheds water away from the flue. We chase cracks to sound concrete, apply a bonding agent, and pour new crown mix with a proper slope and drip edge, or apply a specialized crown coating when the damage is caught early. Kirkland’s freeze-thaw cycles, particularly in shaded lots near Juanita Bay Park, accelerate crown failure when water seeps into hairline cracks and expands.
Crown Coating
Crown coating is a preventive or early-intervention application of flexible, waterproof membrane over an intact but weathered crown surface. We clean the crown thoroughly, repair minor cracks, and roll or brush a coating formulated for chimney crowns, typically from HeatShield or DuraFlex materials through our Haven network. This extends crown life 5-10 years when applied before structural cracking begins, and we document the crown condition with camera footage so you can see exactly why we’re recommending it.
Multi-Flue Cap
Multi-flue caps cover two or more flues with a single hooded structure, common in Chimney Cap & Crown - Redmond area homes with fireplaces and furnaces sharing a chimney or in properties with multiple fireplaces. We measure the full chimney top, fabricate or source a cap with adequate clearance above each flue, and anchor it to the chimney crown or masonry with proper flashing integration. Homes in the Kingsgate area built in the 1990s often have this configuration, and a single multi-flue cap eliminates the gap problems that occur when individual caps are spaced too closely together.
Custom Cap
Custom caps are fabricated for non-standard flue sizes, historic chimneys, or homeowners who want specific materials like copper or extended skirt dimensions. We take precise field measurements, send specifications to our Haven network fabricators, and install with custom flashing as needed. In the Market neighborhood and along Lake Washington, we’ve fitted custom caps for historic homes where standard catalog sizes would compromise the roofline aesthetic or fail to cover oversize flues from original masonry construction.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Chimney Cap & Crown
We source and install chimney cap and crown materials from Famco, Copperfield, DuraFlex, and HeatShield through Haven’s buying network, which we established specifically to keep customer prices honest and quality consistent. Famco’s galvanized and stainless steel caps are our standard recommendation for Kirkland’s salt-air exposure near the lake, we’ve installed hundreds of their units and stock common sizes for same-visit replacement when the inspection reveals a failed cap. Copperfield’s multi-flue and custom-fabrication options handle the complex chimney tops we encounter in the Bridle Trails equestrian properties and larger estate homes east of I-405.
DuraFlex and HeatShield supply the crown repair and coating systems we apply when concrete deterioration is the primary issue rather than cap failure. We’ve used HeatShield’s crown coating on dozens of Kirkland chimneys where early intervention preserved the original crown structure, and DuraFlex’s bonding agents and pourable crown mix for full rebuilds where cracking has progressed to spalling or separation from the flue tile. Whether you have a Famco cap already installed, a Copperfield system from a previous contractor, or any other make, we can inspect, repair, or replace it with documented photo evidence of what we found and what we did.
BeforeAfterSigns You Need Chimney Cap & Crown Right Now
- Water stains on your fireplace ceiling or walls. This means moisture is entering through a failed cap, cracked crown, or deteriorated flashing. In Kirkland’s wet season, which runs October through May, a missing or damaged cap can funnel hundreds of gallons of water into your chimney system, damaging the flue liner, smoke chamber, and surrounding framing.
- Rust flakes or water in your firebox. If you see orange staining on the firebrick or actual standing water after rain, your cap is either missing, incorrectly installed, or the crown is cracked directly above the flue. We document this with a camera scan to show you the exact path water is taking.
- Animals or nesting debris visible from below. Squirrels, raccoons, and starlings enter uncapped flues readily, and their nests block draft and create fire hazards. We remove the obstruction, install a properly meshed cap, and inspect for damage the animals may have caused to the flue liner.
- Spalling or flaking concrete on your chimney top. This is advanced crown deterioration where freeze-thaw cycling has broken the concrete surface. Once spalling begins, the crown loses its slope and water begins ponding, accelerating damage to the masonry below and potentially the attic structure.
- Your cap is visibly tilted, loose, or missing after wind. Kirkland’s winter windstorms, particularly those coming off Lake Washington, can dislodge poorly secured caps. A tilted cap channels water into the flue instead of away from it, and a missing cap leaves the flue entirely exposed.
Our Chimney Cap & Crown Process - Step by Step
- 1
Schedule and confirm. Call (425) 642-3485 or reach our live phone support 24 hours a day, 7 days a week. We assign you a named technician, provide their license number, and text when they’re en route to your Kirkland home. You’ll receive a written appointment confirmation with our 365-Day Done Right Promise noted.
- 2
NFPA 211 Level 2 inspection with camera scan. Your technician arrives in uniform, sets up containment if working inside, and runs a camera down the flue to document liner condition, creosote buildup, and any water damage patterns. We also photograph the crown and cap from the roof or ladder, showing you cracks, rust, or deterioration in real time on a tablet.
- 3
Written price and scope before any work. Based on what the camera and photos reveal, we deliver a written estimate with line-item pricing, materials specified by brand and gauge, and the warranty terms. This is Haven Standard Clause 1: Have it in writing. No work begins until you approve the scope in writing.
- 4
Cap or crown work with photo documentation. We complete the agreed work, whether that’s cap removal and replacement, crown crack repair and coating, or full crown rebuild. Every step is photographed for your record, and we perform a post-work camera scan to confirm flue integrity and proper draft function.
- 5
Final documentation and warranty. You receive a completed job packet: before and after photos, camera footage, written scope fulfilled, and warranty documentation with the 365-Day Done Right Promise. This record goes into your file and ours, maintaining the documented archive that Clause 4 of the Haven Standard requires on every job since 2009.
How Much Does Chimney Cap & Crown Cost in Kirkland?
A standard single-flue cap installation in Kirkland typically runs $280-$450, including the cap, fasteners, and labor. Cap replacement on an existing flue with accessible roof conditions usually falls in the same range, though steep pitches or multi-story homes may add $75-$150 for proper safety equipment and setup time. Crown coating, when the concrete is intact but weathered, generally costs $350-$650 depending on crown size and whether minor crack repair is needed first.
Crown repair with partial rebuild or full pour runs $650-$1,400 in Kirkland, varying with crown dimensions, accessibility, and whether the flue tile needs resetting or replacement. Custom caps and multi-flue systems start around $850 and can reach $1,850 for complex fabrications in copper or oversized dimensions. These prices reflect materials sourced through our Haven buying network from Famco, Copperfield, DuraFlex, and HeatShield, not retail markup.
What affects your specific price: roof pitch and height, number of flues, crown condition beneath the cap, and whether the existing fasteners have corroded into the flue tile. We avoid overcharging by inspecting first with a camera scan, so you don’t pay for a crown rebuild when a coating would suffice, or for a custom cap when a standard size fits properly. Our free estimate includes the full inspection, photo documentation, and written price with no obligation to proceed.
Every quote includes the cap or crown work, materials, fasteners or bonding agents, photo documentation, and the 365-Day Done Right Promise. We also offer a Free Second Opinion on any competitor’s written estimate, clause 6 of the Haven Standard, because we believe informed customers make better decisions.
Chimney Cap & Crown Near Kirkland - Our Service Area
We serve Kirkland directly and the surrounding communities including Redmond, Bellevue, Bothell, Seattle, Shoreline, Lynnwood, Issaquah, Renton, Tukwila, Bainbridge Island, and SeaTac. Most Kirkland appointments are scheduled within 2-4 business days, with Finn Hill, Juanita, and Rose Hill typically our fastest response areas. For Chimney Cap & Crown in Redmond or Chimney Cap & Crown in Bellevue, we coordinate routing to maintain the same technician assignment and arrival text notification. Call (425) 642-3485 to check current availability in your neighborhood.
Serving Kirkland, WA - Our Local Coverage Area
We’re based in the Kirkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Chimney Cap & Crown in Kirkland
Our Chimney Cap & Crown in Bellevue service covers the installation, repair, or replacement of the metal cap that covers your flue opening and the concrete crown that tops your masonry chimney. The cap keeps water, animals, and debris out of the flue while allowing smoke and gases to escape; the crown sheds water away from the flue and protects the chimney’s structural masonry below. We inspect both components with a camera scan and roof-level photography, then deliver a written price for any needed work before starting.
Most cap installations and replacements in Kirkland take 1-2 hours, while crown coating adds 2-3 hours including cure time before we can perform the final inspection. Full crown rebuilds typically require 4-6 hours spread across two visits to allow proper curing between pours. We give you a specific time estimate in your written scope, and we don’t leave until the post-work camera scan confirms everything is functioning correctly.
Standard cap work runs $280-$450, crown coating $350-$650, crown repair or rebuild $650-$1,400, and custom or multi-flue systems $850-$1,850 depending on materials and complexity. Your exact price depends on what our camera scan and roof inspection reveal about your specific chimney’s condition and dimensions. Call (425) 642-3485 for a free estimate with written pricing, no obligation.
Yes, we install, repair, and replace Famco and Copperfield caps regularly, and we source replacement materials through our Haven buying network to keep prices honest. We’ve serviced hundreds of Famco units in Kirkland’s lakefront properties and Copperfield multi-flue systems in larger homes east of I-405. Even if your current cap is a different brand or unmarked, we can identify the manufacturer, assess its condition, and fit a proper replacement.
Our live phone support is available 24 hours a day, 7 days a week, and we prioritize calls where a missing or damaged cap is actively allowing water into the home or where a damaged crown poses immediate structural risk. We don’t promise same-day dispatch, but we do keep common cap sizes in stock for faster turnaround when the inspection confirms a standard replacement will solve the problem. Call (425) 642-3485 to discuss your situation and current scheduling.
Every job is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. Material warranties vary by manufacturer, Famco and Copperfield caps carry their own product warranties that we pass through to you, and our labor warranty covers installation quality for the full year. All warranty terms are written into your job documentation before work begins, Haven Standard Clause 1.
Clear a path to your fireplace if interior access is needed, move any vehicles that block roof-line access from the driveway, and ensure pets are secured before our technician arrives. We bring our own containment, ladders, and safety equipment. If you have previous inspection reports or contractor paperwork, have it available, we’ll review it to see whether prior work may have affected your cap or crown condition. Call (425) 642-3485 to schedule, estimates are free.
Schedule Your Chimney Cap & Crown Service in Kirkland Today
Call (425) 642-3485 for a free estimate with written pricing before any work starts. Our live phone support is available 24 hours a day, 7 days a week. We’ll assign you a named, licensed technician, send a text when they’re on the way, and deliver a documented photo record of everything we find and everything we do, backed by the 365-Day Done Right Promise. No obligation, no hidden fees, no work without your written approval.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Kirkland since 2009.